Sinowell Metal is a leading Galvalume coil manufacturer in China who offers the top quality of Galvalume Steel Coils and Galvalume Sheets.
Gavalume/Galfan Coil is produced with cold rolled steel sheets with various strengths and thicknesses as the raw materials and are coated with aluminum (Al 55%), zinc (zn 43.5%) and silicon (Si 1.5%) alloy. It posseses with excellent anti-corrosion properties.
Galvalume Steel Coils
Galvalume Coil production line
From the Payoff Reels to Welding to Degreasing to Annealing Furnace and Entry Accumulator to Ceramic Zinc Boiler to Cooling Tower by Air Knife and to Leveling and Straight Edge Forming to Passivization/Anti-finger Tower to Exit Accumulator to Oiling Quality-Controlling to Cutting and Slitting to Coiling.
Coating Mass: Galvalume 50-300g/M²
Coil ID: 508mm/610mm
Treatment: Skin-passed, Chromated, AFP, Oiled.
Coil Weight: 3-25MT
Quality: CQ, DQ, HSLA.
Coil ED: 1000-2100mm
Galvalume coil has excellent corrosion resistance. Aluminized zinc layer physical isolation, electro-chemical protection, and trivalent aluminum ion doping effect of the Galvalume coil has a good corrosion resistance. The life of galvalume coil is 2 to 6 times that of ordinary galvanized steel In the same environment.
Galvalume coil has good thermal reflectivity. Its reflection coefficient is twice as the hot galvanized sheet, in the summer can reduce the indoor temperature, reduce air conditioning electricity consumption.
Galvalume coil for construction industry:
Main applications are roof panels, within the board, keel, (purlins), pipes.
Common grades: DC51D + Az, S350GD + Az, S550GD + Az.
Common specifications: 0.5-0.6mm, 1000 / 1200mm 0.3-1.5mm
Coatings: 75-150g per M²
Post-processing: non-environmentally friendly anti-finger print.
Galvalume Coil for Electrical cabinet industry:
Main use: side panels, roof, bottom plate, support pieces
Common grades: DC51D + Az
Common specifications: support / 1.0-2.0mm about 20% Panel / 1.8-2.0mm about 70%, 2.5mm about 10% 900-1250mm
Coatings: 75 / 150g / m2
Post-processing: non-environmentally friendly, environmentally friendly Anti-finger print.
Affected by cost and environmental (spray) requirements factors, Galvalume coil with a beautiful appearance and excellent corrosion resistance, more and more alternative for hot-dip galvanizing and cold-rolled coating steel. Galvalume coil in the processing of the need to deal with the edge of the zinc aluminum has 180 plated 0T bending without zinc cracking requirements; Since the CNC machining of claim wave plate edge wave; As the appearance of the galvalume coil pieces, requiring the surface of zinc spangle, bright and no obvious visible defects.
Appliance industry requirements for galvalume coil products.
Main use: refrigerator backplane, air conditioning washing machine base, explosion-proof belt Water heater tube, monitor, TV backplane, satellite antenna pot and so on
Common grades: DC51D + Az, DC52D + Az, DC54D + Az
Common specifications: 0.3-0.4mm, 0.8-1.2mm (air conditioning, washing machine bottom plate) 900-1250mm
Galvalume coatings: 40-300g / m2
Post-processing: environmentally friendly anti-fingers print, environmental passivation
Leave a Reply